400GBASE-SR8 OSFP PAM4 850nm 100m With FEC DDM MPO-16 MMF Optical Transceiver Module 400G QSFPDD 850nm 100m SR4 MPO Generic Compatible

OSFP MSA compliant

8 parallel lanes on 850nm center wavelength

Compliant to IEEE 802.3bs Specification

Up to 100m transmission on multi-mode fiber (MMF) OM3 with FEC

Operating case temperature: 0 to 70oC

8x53.125Gb/s electrical interface (400GAUI-8)

Data Rate 53.125Gbps (PAM4) per channel.

Maximum power consumption 12W

MPO-16 connector

RoHS compliant

Application

Data Center Interconnect

400G Ethernet

Infiniband interconnects

Enterprise networking

Transceiver Block Diagram

Optical Characteristics

Notes:

1. Average launch power, each lane (min) is informative and not the principal indicator of signal strength. A transmitter with launch power below this value cannot be compliant; however, a value above this does not ensure compliance.

2. Even if the TDECQ < 1 dB , the OMAouter (min) must exceed the minimum value specified here.

3. The receiver shall be able to tolerate, without damage, continuous exposure to an optical input signal having this average power level.

4. Average receive power, each lane (min) is informative and not the principal indicator of signal strength. A received power below this value cannot be compliant; however, a value above this does not ensure compliance.

5. Receiver Sensitivity OMAouter, each lane (max) is informative and is defined for a BER of 2.4x10-4.

6. Measured with conformance test signal at receiver input for the BER of 2.4x10-4.

7. These test conditions are for measuring stressed receiver sensitivity. They are not characteristics of the receiver.

Warranty:

We promise all the advertised optical transceivers are brand new with new components and parts.

We absolutely never use old and refurbished materials.

All the optical transceivers have been through functional test and aging test.

We provide 3 years warranty for all the optical transceivers from the date of shipment.